model

HDR-150-12

HDR-150-15

HDR-150-24

HDR-150-48

output

DC voltage

12V

15V

24V

48V

Rated current

115VAC

10.2A

8.55A

5.31A

2.72A

230VAC

11.3A

9.5A

6.25A

3.2A

Rated power

115VAC

122.4W

128.3W

127.4W

130.6W

230VAC

135.6W

142.5W

150W

153.6W

Ripple and Noise (Max) Note 2

100mVp-p

120mVp-p

150mVp-p

200mVp-p

Voltage adjustment range

10.8~13.8V

13.5 ~ 18V

21.6 ~ 29V

43.2~55.2V

Voltage accuracy note 3

±2.0%

±1.0%

±1.0%

±1.0%

Linear adjustment rate

±1.0%

±1.0%

±1.0%

±1.0%

load regulation

±1.0%

±1.0%

±1.0%

±1.0%

Start-up and rise time

500ms, 60ms/230VAC 500ms, 60ms/115VAC (at full load)

Hold time(Typ.)

30ms/230VAC 12ms/115VAC (when fully loaded)

enter

voltage range

85 ~ 264VAC (277VAC available) 120 ~ 370VDC (390VDC available)

frequency range

47 ~ 63Hz

Efficiency(Typ.)

0.89

0.895

0.905

0.905

AC current(Typ.)

3A/115VAC??????1.6A/230VAC

Inrush current(Typ.)

Cold start 35A/115VAC 70A/230VAC

Protect

overload

105 ~ 135% rated output power

?

When the output voltage is

The output voltage is in constant current mode at 50% ~ 100%, and can automatically recover after the abnormal load condition is removed.

Overvoltage

14.2~16.2V

18.8 ~ 22.5V

30~36V

56.5 ~ 64.8V

?

Protection mode: shut down the output and can be restored after the power is restarted

environment

working temperature

-30 ~ +70℃ (please refer to "Derating Curve")

Working humidity

20 ~ 90% RH non-condensing

Storage temperature and humidity

-40 ~ +85℃, 10 ~ 95% RH non-condensing

temperature coefficient

±0.03%/℃ (0 ~ 45℃) RH non-condensing

Vibration resistant

10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z each 60 minutes; installation: in line with IEC60068-2-6

Operating altitude

2000 meters (note 4)

Overvoltage level

Ⅲ;According to EN62368, EN61558, EN50178, EN60664-1, EN62477-1; Altitude up to 2000 meters

?

?

safety regulations and

electromagnetic

compatible

(Note 7)

safety regulations

IEC62368-1, UL62368-1, UL61010, TUV BS EN/EN61558-2-16, BS EN/EN61558-1, EACTPTC 004 certified;

Design reference BS EN/EN50178, TUV BS EN/EN62368-1

Pressure resistant

I/P-O/P:4KVAC

Insulation resistance

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

Electromagnetic compatibility emissions

Parameter

Standard

Test Level / Note

Conducted

BS EN/EN55032(CISPR32)

Class B

Radiated

BS EN/EN55032(CISPR32)

Class B?(note 5)

Harmonic Current?(Note 6 )

BS EN/EN61000-3-2

Class A

Voltage Flicker

BS EN/EN61000-3-3

-------

Electromagnetic compatibility immunity

BS EN/EN55024, BS EN/EN61000-6-2

Parameter

Standard

Test Level /Note

ESD

BS EN/EN61000-4-2

Level 3, 8KV air; Level 2, 4KV contact, criteria A

Radiated Susceptibility

BS EN/EN61000-4-3

Level 3, criteria A

EFT/Burest

BS EN/EN61000-4-4

Level 3, criteria A

Surge

BS EN/EN61000-4-5

Level 4,2KV/L-N, criteria A

Conducted

BS EN/EN61000-4-6

Level 3, criteria A

Magnetic Field

BS EN/EN61000-4-8

Level 4, criteria A

Voltage Dips and interruptions

BS EN/EN61000-4-11

>95% dip 0.5 periods, 30% dip 25 periods,

>95% interruptions 250 periods

other

MTBF

3046.3K hrs min.????Telcordia SR-332 (Bellcore) ; 535.9K hrs min.????MIL-HDBK-217F (25℃)

size

105*90*54.5mm (W*H*D)

Package

0.31Kg; 32pcs/11Kg/1.0CUFT

Remark

1. Unless otherwise specified, all specifications and parameters are measured at an input of 230VAC, rated load, and an ambient temperature of 25°C.

2. Ripple and noise measurement method: Use a 12" twisted pair, and the terminal should be connected in parallel with 0.1uf and 47uf capacitors, and measure at a bandwidth of 20MHZ.

3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.

4. Installation distance: When permanently loaded with full power, the recommended distance is 40mm from the top, 20mm from the bottom, and 5mm from the left and right sides. If the adjacent device is a heat source, the recommended spacing is 15mm.

5. The output needs to be derated when the input voltage is low. Please refer to the derating curve for details.

6. The power supply is regarded as part of the components in the system and needs to be confirmed with electromagnetic compatibility in conjunction with the terminal equipment.

Guidance on EMC test methods,

7. When the altitude exceeds 2000 meters (6500 feet), the ambient temperature of the fanless model decreases at the rate of every 3.5℃/1000m, and the ambient temperature of the fan model decreases at the rate of every 5℃/1000m.