- solid state relay
- Circuit Board Solid State Relay
- Single phase solid state relay
- Industrial Solid State Relays
- Three-phase solid state relay
- Three-phase forward and reverse solid state relay
- Rail type three-phase solid state relay
- Industrial grade solid state relay module
- Tension controller
- Intelligent voltage regulation module
- Single and three-phase silicon controlled trigger
- heat sink
- Semiconductor module, rectifier bridge series
- time relay
- Digital display counter
- water level controller
- timer
- switching power supply
- S series switching power supply
- MS series switching power supply
- LRS series switching power supply
- D, T, Q multi-group series switching power supply
- DR rail series switching power supply
- NDR rail series switching power supply
- MDR rail series switching power supply
- HDR rail series switching power supply
- FY rainproof series switching power supply
- FS rainproof series switching power supply
- Foot switch
- Fan water pump controller
PK110FG-16
Features
?
1.The chip is electrically insulated from the base plate, 2500V AC voltage;
2. International standard packaging;
3. Vacuum + hydrogen charging protective welding technology;
4. Press-fit structure, excellent temperature characteristics and power cycle capability;
5. The isolation voltage between input and output terminals is ≥2500VAC;
6. Modules below 200A are all forced air-cooled, and modules above 300A can be air-cooled or water-cooled;
?
Model meaning
?
PK110-16 | Model meaning |
P | P: semiconductor module |
K | Module category: C: Ordinary rectifier; K: Ordinary thyristor, D: (C and K) hybrid module |
110 | Rated current: 70A 90A 110A 130A 160A 200A 250A |
16 | Rated voltage level (x100=VoRM or VRRM) |
?
Technical parameters
?
model | Normal state average current | Reverse off-state repetitive peak voltage | On-state peak voltage | On-state peak current | Repeat forward and backward Peak current | trigger current | trigger Voltage | maintain current | Off-state voltage critical rise rate | Critical rise rate of on-state current | Maximum rated junction temperature | Insulation voltage | weight |
It(OFF) | VdrmVrrm | Vtm | Itm | IdrmIrrm | Igt | Vgt | Them | dv/dt | in/dt | Tm | Everything | Weight | |
Type | A | V | V | A | mA | mA | V | mA | V/μs | A/μs | ℃ | V(AM) | g |
PK70A-16 | 70 | 400-2600 | 1.9 | 210 | 10 | 100 | 2.5 | 100 | 800 | 100 | 125 | 2500 | 165 |
PK90A-16 | 90 | 400-2600 | 1.9 | 270 | 15 | 100 | 2.5 | 100 | 800 | 100 | 125 | 2500 | |
PK110A-16 | 110 | 400-2600 | 1.9 | 330 | 20 | 100 | 2.5 | 100 | 800 | 100 | 125 | 2500 |
?
Wiring diagram
?
?
Appearance and installation dimensions drawing
Product application
?
1. AC and DC motor control; 2. Various rectified power supplies; 3. Industrial heating control; 4. Dimming; 5. Contactless switch; 6. Motor soft start; 7. Static reactive power compensation; 8. Welding machine ; 9. Frequency converter; 10. UPS power supply; 11. Battery charging and discharging.
?
illustrate:
?
a. Vdsm/Vrsm=Vdrm/Vrrm+200V;
b. Unless otherwise stated, Lgt, Vgt, Ih, Vtm, and Viso are debugging values ??under 25, and other parameters in the table are test values ??under Tvjm;
c. I2t=I2tsmTW/2, where TW: bottom width of sinusoidal half-wave current, at 50HZ frequency, I2t(10ms)=0.005I2tsm(A2S);
d. When used at a current of 60HZ, Itsm(8.3ms)=1.066(10ms),I2t(8.3ms)=0.943I2tsm(10ms;)